Save 10% OFF Gree! Going on Now!
Mon - Fri 8:00am - 8:00pm EST
See Trending Products

You have no items in your shopping cart.

Uniweld 40055

Sludge Sucker/Blaster Maintenance Kit
SKU : 40055
Uniweld 40055 - Sludge Sucker/Blaster Maintenance KitUniweld 40055 - Sludge Sucker/Blaster Maintenance Kit
Move your mouse over image or click to enlarge
blank image

About this Item

Sludge Sucker/Blaster Maintenance Kit
check In Stock
In Stock
Looking for Help or Advice?
Our dedicated team is here to help you through the process of selecting the right system or part.

Product Highlights

Uniweld 40055 Nitrogen Sludge SuckerÆ Maintenance Kit (Maximum Delivery Pressure 400 PSI) Nitrogen is a dry inert gas with multiple uses in the HVAC/R and Maintenance Industry. The Nitrogen Sludge SuckerÆ Maintenance Kit was specifically designed for the following applications: Purging copper lines with low pressure nitrogen displaces the oxygen, preventing oxidation and the resulting scale. Scale left inside the tubing can cause blockage within the TXV Valve and other A/C system components. Pressure testing a system for leaks prior to pulling a vacuum and charging the system with refrigerant will save time and money! Cleaning a condensate drain line is easy with the use of a Sludge SuckerÆ or Sludge BlasterÆ The Sludge SuckerÆ is a tool that was developed to clean out a condensate drain line without having to access the drain pan located in the A/C System's Air Handler. The Sludge Sucker's clear vinyl hose is attached to the 3/4 Inch PVC condensate drain line on the outside of the building. With the use of Nitrogen, CO2 or water suction is created that pulls all the sludge and algae from the drain pan and drain line; then blows it onto the ground outside. The Sludge BlasterÆ is inserted into the drain line (Pipe Capacity: 3/4 Inch to 1 Inch) and expands inside the pipe with the use of nitrogen pressure blasts the sludge and algae free. This kit includes lots of accessories like an air chuck to fill up flat tires, a needle tip for blowing off coils and rubber plug adaptors for blowing out copper lines, aluminum tubing, hoses and condensate drain line. Kit Includes: Part No. RHP400 Nitrogen Regulator - Maximum Delivery Pressure up to 400 PSI, 1/4 Inch Male Flare Outlet Connection, CGA580 Inlet Tank Connection and protective rubber gauge boots, Part No. 40000 Sludge SuckerÆ, Part No. 40061 Sludge BlasterÆ, Part No. H5SMY 5 Ft. Service Hose, Part No. H2SSM 2 Ft. Service Hose, Part No. BG1 Blowgun, Part No. 40048 Needle Tip, Part No. 40050 1/2 Inch Rubber Plug, Part No. 40022 3/4 Inch Rubber Plug, Part No. 40045 Air Chuck

Manuals & Docs

Uniweld 40055 - Sludge Sucker/Blaster Maintenance Kit
Weight 5.3 Pound (lb.)
Height 4.5 Inches (In)
Width 16.25 Inches (In)
UPC 688456400553
Length 11.5 Inches (In)
Brand Uniweld
Capacity 120 PSI
Color Black, Blue, Clear, Orange, Silver, Yellow
Material Brass / Rubber
Temperature Range Not specified
Warranty Offered 1 Year
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!