Save 10% OFF Gree! Going on Now!
Mon - Fri 8:00am - 8:00pm EST
See Trending Products

You have no items in your shopping cart.

Sporlan 901103

ORIT-6-0/50 3/4" 7/8" ODF 0 - 50 PSIG

SKU : 901103
Sporlan 901103 - ORIT-6-0/50 3/4" 7/8" ODF 0 - 50 PSIGSporlan 901103 - ORIT-6-0/50 3/4" 7/8" ODF 0 - 50 PSIG
Move your mouse over image or click to enlarge
blank image

About this Item

Pressure Regulating Valve ORIT-6-0/50 3/4" 7/8" ODF 0 - 50 PSIG
check In Stock
In Stock
Looking for Help or Advice?
Our dedicated team is here to help you through the process of selecting the right system or part.

Product Highlights


The Sporlan line of evaporator pressure regulating (EPR) valves are designed to provide an accurate and economical means of balancing system capacity and load requirements during ìlowî loads and/or while maintaining different evaporator conditions on multitemperature evaporator systems. These valves control evaporator temperature by maintaining evaporator pressure. As the evaporator load increases the ORI valves will Open on Rise of Inlet pressure above the valveís setting to provide more flow capacity to meet the evaporator load. When the evaporator load decreases the valves will modulate closed to maintain the pressure setting of the valve.
Sporlan offers a number of EPR valve types in various sizes, and with optional features to accommodate almost any industry requirement.
  • Maintain minimum evaporator temperature to avoid frost on air coils and provide improved humidity control
  • Evaporator temperature control for food merchandisers (single and multiple evaporator systems)
  • Evaporator temperature control on water chilling units
Required Sizing Information
  • Refrigerant type
  • Evaporator design capacity
  • Design evaporator temperature or minimum evaporator pressure
  • Available pressure drop
  • Allowable evaporator pressure change (only applies to direct acting models)
ORIT-6 and -10 Features
  • Direct acting (most economical)n Adjustable
  • Hermetic construction (no gaskets or seals)
  • Corrosion resistant construction
  • Inlet pressure tap (standard)
  • Inlet strainer (standard on ODF models)
These direct acting EPRs are offered in two sizes. The direct acting design although economical requires an evaporator pressure change above the minimum evaporator pressure setting to provide the rated flow capacity. The nominal ratings are based on an 0.55 bar evaporator pressure change for the 0/3.45 bar adjustment range, and a 0.83 bar change for the 2.07/6.90 bar adjustment range. Valves should be selected for the desired maximum variation in evaporator pressure
Weight 1 Pound (lb.)
Height 1 Inches (In)
Width 6 Inches (In)
UPC 68747218421
Length 10 Inches (In)
Brand Sporlan
Connection Type ODF
Type Pressure Regulating
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!