Save 10% OFF Gree! Going on Now!
Menu
Mon - Fri 8:00am - 8:00pm EST
See Trending Products

You have no items in your shopping cart.

GREE MULTI18BVIR200

18,000 BTU Multi21 Dual-Zone Wall Mount Mini Split Air Conditioner Heat Pump 208-230V (9-9)
SKU : MULTI18BVIR200
blank image

About this Item

GREE Ductless Mini-Split System 18,000 BTU, 208-230 V – Bundle includes – Outdoor Unit: MULTI18HP230V1BO and Indoor Unit: VIR09HP230V1AH (x2)
  • Energy Star Estimated Cooling Cost: $216
  • SEER: 22
  • Room Size: 600 - 1,000 ft2
This item has been retired by the manufacturer and is no longer available. We carry the new replacement version of this model, which has been designed as a comparable match.
  • {{label}}:{{options}}
{{qty}} x {{name}}
{{qty}} x {{name}}
  •  
Looking for Help or Advice?
Our dedicated team is here to help you through the process of selecting the right system or part.

* Required Fields

About this Item

GREE Ductless Mini-Split System 18,000 BTU, 208-230 V – Bundle includes – Outdoor Unit: MULTI18HP230V1BO and Indoor Unit: VIR09HP230V1AH (x2)
  • Energy Star Estimated Cooling Cost: $216
  • SEER: 22

Product Highlights

This is the replacement SKU Number for MULTI18HP200

System Includes:
  • Outdoor Condenser Model: MULTI18HP230V1BO
  • Indoor Wall Mounted Model: VIR09HP230V1AH (x2)
  • Wireless Remote Control (x2)
  • Required, but not included: 1/4" x 3/8" line set (x2)
The GREE Multi21 Dual-Zone VIREO 18,000 BTU System is powered by GREE's energy efficient G10 inverter and a Variable Speed compressor. These units can heat and cool 2 zones without distribution boxes. Our G10 inverter technology saves energy, reduces outdoor noise and keeps room temperature steady by eliminating the harsh starts & stops of conventional systems.

Our Multi Wall-Mount is energy efficient, yet powerful enough to keep you comfortable all year round. GREE's whisper quiet fan technology means you'll always have quiet comfort and you can easily manage a variety of useful features with the infrared remote control, or a wired tether controller.

Features & Benefits:

  • Four Fan Speeds
  • Eco-friendly R410A Refrigerant
  • No Refrigerant Distribution Boxes
  • IR Remote Controller
  • Low Ambient Cooling 22°F
  • Turbo Mode
  • Comfortable Sleep Mode
  • Vertical Swing Louver
  • Dry Coil Mode for Anti-Mildew Protection
  • Heavy Gauge Steel Cabinet
  • Sound Levels down to 56 db(A)
  • Multi-point Diagnosis
  • Multi Condensate Ports
  • Remote Control Lockout
  • Cleanable Air Filter
  • Power Failure Recovery
  • Healthy Filter (Optional)
  • Tethers Wired Controller (Optional)

Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty.

Which line set kit do I need?
This system uses (2) 1/4" x 3/8" line set. These are sold separately, and you can choose from our 15 ft, 25 ft, 35 ft, and 50 ft lengths. The length needed depends on the needs of your project and how you will set up the system (distance from outdoor condenser to indoor air handler).

Can I install this myself?
While installation of a ductless split is much easier than a central air system, it's still much more advanced than installing a window unit or portable. Furthermore, the manufacturer warranty is only valid if a licensed professional does the installation. So while it is possible to do the installation yourself, we strongly recommend you hire an HVAC professional in your area.

Is this backed by a warranty?
Yes, it comes fully backed by a manufacturer's warranty, and ComfortUp is an authorized online seller of these systems. Our Customer Care team will provide assistance should you ever need to file a warranty claim with the manufacturer. Please be aware that only systems that are installed by a licensed HVAC contractor are backed by the warranty. Proof of licensed installation is required. The receipt/invoice from your contractor should be sufficient.

Average Ratings

5.0
1 Review(s)

Manuals & Docs

Gree MULTI18HP230V1BO - 18,000 BTU 22 SEER Multi21 Ductless Mini Split Heat Pump Outdoor Unit 208-230V
Gree VIR09HP230V1AH - 9,000 BTU 23 SEER VIREO Ductless Mini Split Wall Mount Indoor Unit 208-230V
UPC 841999140526
Brand GREE
Model Family MULTI 21
Equipment Type Heat Pump
SEER 22
EER (Energy Efficiency Ratio) 12.5
Refrigerant R-410a
HSPF (Heating Seasonal Performance Factor) 9.0
Rated Cooling Capacity (BTU) 18,000
Rated Heating Capacity (BTU) 19,000
Nominal Capacity (BTU) 18,000
Voltage 208-230 VAC
Phase Single
Cycle/Hertz 60
Minimum Circuit Amps 15
Maximum Fuse Size 25
Number of Zones/Rooms 2 Zones
Color White
Inverter Technology Yes
Mounting Type Wall Mount
Warranty Offered 7 Year Compressor - 5 Year Parts to Original Registered End-User with Proof of Proper Installation
Energy Star Rated Yes
Wireless No
Filter Type Washable
Room Size 600 - 1,000 ft2
Sound Pressure Rating 56 dB(A)
Corrosion Protection Yes
Minimum Heating Capacity 8530
4-Way Remote Air Flow Control No
Maximum Heating Capacity 22600
Liquid/Gas Line Set Size 1/4" X 3/8"
Minimum Cooling Capacity 7000
Maximum Cooling Capacity 21000
Tonnage 1 1/2

Remote Controller

Remote Control

Part Name

  • ON/OFF Button
  • Fan Button
  • Mode Button
  • Up Button
  • Swing Button
  • Turbo Button
  • Down Button
  • Temp Button
  • Sleep Button
  • I Feel Button
  • Clock Button
  • Light Button
  • Timer On/Off Button

INTRODUCTION FOR ICONS ON DISPLAY SCREEN

Remote display icon

REMOTE CONTROLLER OPERATIONS

The wireless remote controller is sleek, versatile and allows you to change room temperatures and functions on your Vireo system from the palm of your hand. The large LCD display and buttons make it easy-to-understand and easy-to-use.

The remote controller is set from factory to display temperatures in °F. If °C is desired, turn the remote controller OFF with the ON/OFF button and then press “MODE“ and buttons on the remote simultaneously for 5 seconds.

On mode display

ON/OFF BUTTON

When the system is in OFF mode, the remote controller will display the time and last room setpoint. When you press the ON/OFF button, this indicator will be displayed and the unit will start in the last operating mode and room setpoint.

NOTE: If the ON/OFF button is pressed too soon after a stop, the compressor will not start for 1 to 5 min. due to the inherent protection against frequent compressor cycling.

On mode display

DISPLAYING SETPOINT, INDOOR OR OUTDOOR
TEMPERATURE ON FRONT PANEL:

The setpoint temperature, outdoor temperature or room temperature can be displayed on the front panel. Only setpoint temperature is displayed on the remote controller.

When the “TEMP” button is pushed once, the temperature indicator Indicator icon is displayed. This indicates that the setpoint temperature is displayed on the front panel.

When the “TEMP” button is pushed a second time, the display will show an Indicator icon icon with a thermometer inside a house. This indicates that the room temperature is displayed on the front panel.

When the "TEMP” button is pushed a third time, the display will show an Indicator icon icon with a thermometer outside a house. This indicates that the outdoor temperature is displayed on the front panel. (Not available on some models).

The room temperature and outdoor temperature will be displayed for only 5 seconds before reverting back to displaying room setpoint.

Icon

VERTICAL SWING LOUVERS

  • Press the Vertical Swing Louver button to select five different vertical (up & down) air discharge directions including Continuous Sweep. The Swing Louver Icon icon will be displayed. Press this button to set swing angle, which changes in direction as below: Icon image Icon Indicates louver swings back and forth in the five directions, as shown.

Icon

PRIVACY LOCK

The Privacy Lock prevents unauthorized access to the unit controls and prevents tampering with system settings. The remote controller can be locked by pushing the "" and "" buttons simultaneously for 5 seconds. The Privacy Lock icon will be displayed on the remote controller. Repeat the process to unlock the remote controller.

Icon

I FEEL MODE

Press this button to use the I FEEL function, and the (Icon) icon will be displayed. The unit will sense room temperature at the remote controller instead of at the indoor unit. It then adjusts airflow and temperature accordingly for the ultimate in personal comfort control and energy savings. Press the button again to exit this function. For best performance, keep remote controller away from heat or cold temperature sources while using this function.

On mode display

MODE BUTTON

Use the “MODE” button to select one of the available modes. The selected mode will be displayed on the remote controller and the appropriate light will illuminate on the front display panel.

  • AUTO – Unit will automatically select heating or cooling to maintain room temperature between 68°F and 77°F. The remote controller will display the Auto Mode icon with no setpoint.

    COOL – To cool to selected setpoint and remove moisture. Press or to adjust set temperature. System varies compressor speed to maintain desired temperature.

    HEAT – To heat to selected room setpoint. Press or to adjust set temperature. System varies compressor speed to maintain desired room temperature.

    FAN ONLY – To circulate air without heating or cooling. Use Fan Speed button to select speed from low to high.

    DRY – Select DRY MODE to increase moisture removal during warm humid conditions. In this mode, fan speed cannot be adjusted.

    • If the Room Temperature is more than 4°F above the set temperature, the system will be operating in cooling mode with low fan speed.

    • If the Room Temperature is between 4°F higher than, and 4°F less than, the set temperature, the system will cycle 6 minutes ON and 4 minutes OFF in cooling mode. The indoor fan will be at low speed.

    • If the Room Temperature is more than 4°F below the set temperature, the system will be OFF and the indoor fan will be at low speed.

Icon

FREEZE GUARD

In Heat mode, press"TEMP"and "CLOCK" buttons simultaneously to start up 46°F heating function. When this function is started up, "($)" and "46°F" will be displayed on the remote controller, and the unit will maintain room temperature above 46°F. Press"TEMP" and "CLOCK" buttons simultaneously again to cancel Freeze Guard protection.

Icon

TIMER SETTING

Timer-ON / Timer-OFF BUTTON

To set when you want the unit to turn On at the end of a selected time period, use the button labeled “Timer-ON/Timer-OFF”on the remote controller. Press this button to make the clock icon disappear, replaced with the word “ON” (blinking). Press or buttons to adjust timer setting 1 minute at a time. Press and hold or button to set timer more quickly. Press“Timer-ON/Timer-OFF” button again to confirm setting, and the word “ON” will stop blinking. To cancel, press“Timer-ON/Timer-OFF” button again.

To set when you want the unit to turn Off at the end of a selected time period, use the same button. Press this button to make the clock icon disappear, replaced with the word “OFF” (blinking). Adjust settings the same as with“Timer-ON/Timer-OFF”settings.

NOTE: Under Timer On and Off status, you can set“Timer-ON/Timer-OFF”simultaneously. Before setting timer, be sure to set clock to correct time.

Icon

TURBO MODE

The desired room setpoint can be achieved faster in TURBO mode. After selecting the “HEAT” or “COOL” mode button, push the “TURBO” button. The TURBO Icon icon will be displayed on the remote controller and the unit will run at an ultra-high speed. To deactivate the feature, push the “TURBO” button again. The unit will return to normal operation.

Icon

LIGHT BUTTON

Press this button to turn off display light on indoor unit. Press again to turn it back on.

Icon

FAN BUTTON

Press the FAN button to adjust the indoor fan speed:
Low ( Icon ) Medium ( Icon ), High ( Icon ), Turbo and Auto.

  • Turbo function is not available in Dry and Auto mode.

  • The fan operates at low speed in Dry and Auto modes, and the speed cannot be adjusted.

  • When Auto is selected, the unit will select the proper fan speed automatically, according to the ambient temperature

NOTE: Turbo function is not available in Dry and Auto Modes. The Vireo unit will select proper fan speed automatically according to ambient temperature

Icon

CLOCK SETTING

Press this button to set clock time.“” icon on remote controller will blink. Within 5 seconds, press or button to set clock time. With each pressing of or buttons, clock time will increase or decrease 1 minute. To quickly adjust time setting, press and hold or button for 2 seconds. Release button when you have reached the desired time setting. Press “CLOCK” button to confirm the time, and “” icon will stop blinking.

NOTE: Clock time adopts 24-hour mode. A 12-hour time format is not available.

Icon

ENERGY-SAVING

In Cool mode, press"TEMP" and "CLOCK" buttons simultaneously to start the energy-saving function."SE" will be shown on remote controller, and the unit will adjust the set temperature automatically to reach to the best energy-saving effect. Press"TEMP"and "CLOCK" buttons simultaneously again to cancel energy-saving mode.

Icon

SLEEP MODE

The Vireo system will automatically adjust room temperature during your sleep time. This slight change in temperature will not affect your comfort level due to the natural effects that sleeping has on the body, but it will save on energy consumption and will lower your electric bill. The Vireo System has three Sleep Modes to select from. Press the SLEEP button to select Sleep 1, Sleep 2, Sleep 3 modes or Cancel. The SLEEP Icon icon will appear.

TRADITIONAL MODE - SLEEP 1 Icon

In Traditional Mode the unit will slowly relax the room set temperature by up to 4° F until Sleep Mode is cancelled.

Image
Image

TRADITIONAL MODE - SLEEP 2 Icon

In Expert Mode the unit will adjust the room set temperature at a rate based on the starting set temperature value. Sleep Mode will continue until cancelled.

Image
Image

DIY MODE - SLEEP 3 Icon

You will be required to enter eight (8) room setpoint values for eight (8) hours of run time. The last room setpoint value will be maintained until sleep mode is cancelled.

In Sleep Mode 3, press "Prog" button to enter setup mode. The remote controller will display “1:00” in the time location. Use the “+” and “-“ buttons to select the desired room setpoint for the first hour of run time. Then press the “Prog” button to save the setpoint.

The remote controller time display will change to “2:00.” Once again, use the “+” and “-“ buttons to select the desired room setpoint for the second hour of run time, and press the “Prog” button to again save the setpoint.

Repeat this sequence for the eight (8) room setpoint values. After all eight (8) values have been entered, the remote controller will automatically revert to standard time and temperature display, and the Sleep 3 Mode will begin.

At any time, you may press the “ON/OFF," " Mode," " Timer," "Sleep” or “Turbo" buttons to cancel the Sleep 3 Mode.

NOTE: During this procedure, if no button is pressed within 10 seconds, remote controller will automatically exit the sleep curve setting and resume original display. If ON/OFF, MODE, TIMER, SLEEP, COOLING or HEATING button is pressed during the setting or inquiry procedure, remote controller will also exit the sleep curve setting.

Sleep function will be disabled if the air conditioner is restarted after power failure; Sleep function can not be set in AUTO mode.

CHANGING BATTERIES AND ADDITIONAL NOTES

To change batteries, slide cover off battery compartment on back of remote controller. Remove and safely discard old batteries. Insert two new AAA 1.5V dry batteries, using correct polarity. Reattach back cover.

NOTE:

  • If the remote controller will not be used for a long time, remove batteries to prevent leakage damage.
  • Be sure to aim the remote controller at the receiver of the main unit when operating.
  • When remote emits a signal, icon will flicker; a tone will be heard when unit receives that signal.

CHANGING BATTERIES

Remove batteries
Remove batteries

DAMAGED OR LOST REMOTE CONTROLLER

If remote controller is lost or damaged, the Vireo system can be turned off directly from the indoor unit. Lift the front panel of the indoor wall unit, then press the AUX button to turn on or turn off. When the unit is on, it will operate in AUTO Mode.

Warning
5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
It is working great heats ans cools well
December 29, 2016
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
what is the dimension of the wall mount units on the Gree MULTI18BCROWN200 - 18,000 BTU Multi21 Dual-Zone Wall Mount?
A shopper on Feb 25, 2017
BEST ANSWER: The Gree Multi18BCrown200 indoor (9k) Unit Dimensions are (LxHxD) 37.8 x 12.6 x 8.1-in.

Note** For ALL systems, you can find these answers, Plus additional information, listed in the "Manuals" Tab, just below the product picture.
Example for the Crown Multi18BCrown200 indoor (9k)
http://resource.comfortup.com/is/content/Watscocom/article_1414406819488_en_subs?fmt=pdf