Indoor: GWH18ACD3DNA2DI (x2)
This GREE Evo+ 2-Zone 36,000 BTU Mini Split has is a 3 ton air conditioner with two 18k indoor air handlers. It is a high-efficiency duct-free mini-split heat pump zoning system that provides both heating & cooling in 2 different rooms without duct work. This Multi-Zone system consists of 2 indoor wall-mount units, 1 outdoor condenser, 2 remotes and 2 remote cradles and boosts the comfort levels in all locations of your home or office with individual room control. By eliminating duct work, your installation is simple, fast & cost effective.
Features & Benefits:
- High Efficiency Inverter (up to 16 SEER)
- Gold Fin Condenser
- Eco-friendly R410A Refrigerant
- Photocatalytic Filter
- I-Feel Automatic Function
- Low Ambient Cooling 22°F
- Low Voltage Start-Up
- Intelligent Defrost
- Intelligent Pre-Heating
- Comfortable Sleep Mode
- Auto Swing (Vertical)
- Four Fan Speeds
- Auto Clean
- Dry Anti-Mildew Design
- LED Display
- Automatic Operation
- Control Lock
- Fan Delay Function
- Stylish Design
How many BTUs do you need for your ductless split?
Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty.
Air Conditioner BTU rating / per square foot chart:
(BTU ratings are estimates only, based on 10ft ceilings, with great insulation and windows. Some factors may alter this calculation: lack of insulation, heavy sun, excessively hot regions, & tall ceilings)
9,000 BTU 250-350 sqft 12,000 BTU 350-500 sqft 18,000 BTU 500-750 sqft 24,000 BTU 750-1000 sqft 30,000 BTU 1000-1250 sqft 36,000 BTU 1250-1700 sqft
Make sure you install a unit that is going to properly cool your square footage. An over-sized air conditioner is actually less effective — and wastes energy at the same time. Air conditioners remove both heat and humidity from the air. If the unit is too large, it will cool the room quickly, but only remove some of the humidity. This leaves the room with a damp, clammy feeling. A properly sized unit will remove humidity effectively as it cools.
Which Line Set Kit Do You Need?
Multi Zone systems require linesets that are compatible in size with the indoor air handler. 18k units require a 1/4" x 1/2" line set. The linesets are available here. These are sold separately, and are available in various lengths. Length is dependent on the needs of your project and how you will set up the system (distance from condenser to indoor air handlers).
|Model Family||Evo+ Multi|
|Equipment Type||Heat Pump|
|HSPF (Heating Seasonal Performance Factor)||8.2|
|Rated Cooling Capacity (BTU)||36,000|
|Rated Heating Capacity (BTU)||36,000|
|Nominal Capacity (BTU)||36,000|
|Minimum Circuit Amps||40|
|Number of Zones/Rooms||2|
|COP (Coefficient of Performance)||3.1|
|Mounting Type||Wall Mount|
|Warranty Offered||5/7 All parts are warranted for a period of five (5) years to the original registered end-user with proof of proper installation. The compressor is warranted for a period of seven (7) years to the original registered end-user with proof of proper installation.|
|Energy Star Rated||No|
|Maximum Cooling Capacity||34,120|
|Liquid/Gas Line Set Size||1/4" X 1/2"|
|Minimum Heating Capacity||10,663|
|Maximum Heating Capacity||40,944|
|Sound Pressure Rating||35 dB(A)|
|4-Way Remote Air Flow Control||No|
|Minimum Cooling Capacity||8,530|