GREE ETAC-09HC265V20A-A - 9,000 BTU 11.3 EER PTAC Heat/Cool 265V & 3Kw Heat - Commercial Use
This is no ordinary PTAC. The E-TAC is GREE's most energy efficient PTAC model. Unlike most PTAC's, the E-TAC's energy smart technology keeps utility costs down, while providing unmatched quiet comfort. Internally, a bi-fan motor configuration allows for the whisper quiet sound levels while achieving the highest level of energy efficiency.
This 9,000 BTU GREE E-TAC heat/cool unit is specifically designed to meet the rigorous demands of hospitality, healthcare & many specialty residential installations. This unit is capable of providing cooling and heating for rooms up to 300 sq feet.
With an energy efficiency rating of 11.4 EER, this unit is also your energy efficient choice. Features include a dry mode, & pre-programmed setpoint limits the E-TAC Series is the ideal choice for superior performance & energy savings.
Dry-mode dehumidification option helps control interior moisture problems.
Please note: This system will retrofit into most competitive wall sleeves without a kit. However, new installations will require a Wall Sleeve (Recommended: SLEEVE-INSUL-1PK and a Grille).
This E-TAC will fit into the wall sleeves of Carrier, GE, Amana, Trane, Friedrich, and Bryant - with no need for an accessory retrofit!
This unit is the standard size: 42" x 16" (106.68 cm x 40.64 cm)
- Wireless Thermostat and Remote Control Ready
- Silencer system with Aero-Quiet Fan
- Humidity Control for Individual Comfort
- Freeze Protection - Protects unoccupied rooms from freezing temperatures
- Industry's Best Warranty - 5 Year Limited Warranty
FIVE Years Parts and Labor Coverage on the Sealed Refrigeration System
FIVE Years Limited Parts Coverage on Functional Parts
TWO Years Labor Coverage on Functional Parts
GREE's ETAC has a new condensate (water) disposal system. The outdoor fan prop has a built-in slinger ring which draws condensate and sprays it on the warm outdoor coil for evaporation. This provides a better disposal of excess condensate and improves the unit's operating efficiency.
It is normal and desirable to have some condensate water in the base pan to boost operating efficiency.
Note: This unit will not always evaporate 100% of the unit-generated condensate and blown-in rain water. if it's necessary to control 100% of the condensate, then a Drain Kit can be added.
The two-piece removable filters easily slide in and out from the front of the unit, and the front panel does not need to be removed to access or change the filters. The filters are 100% washable and can be used for the lifetime of the unit.
Do I need a remote control?
These ETAC units are remote control ready, but are not shipped with a remote. If you'd like to add a remote control, they are available separately as an option: GREE E-TAC Remote. You may still control the unit without needing a remote.
What's the difference between a heat/cool and a heat pump unit?
A heat/cool has an electric heat element (like heat coils). This is better for more extreme temperatures but costs a little more on your utilities to run them.
A heat pump reverses the cycle of the AC to provide heat. It uses the heat generated by the system (ideal for moderate climates) and doesn't use electricity to generate the heat - only to run the fans and pumps. This makes heat pumps more energy efficient for heating, but less able to deliver heat in cold climates.
|Weight||103.6 Pounds (Lb)|
|Height||16 Inches (In)|
|Width||42 Inches (In)|
|Length||22.25 Inches (In)|
|Equipment Type||Air Conditioner|
|EER (Energy Efficiency Ratio)||11.3|
|Rated Cooling Capacity (BTU)||9000|
|Rated Heating Capacity (BTU)||10200|
|Minimum Circuit Amps||16.5|
|Maximum Fuse Size||20|
|Electric Heat Range [kW]||3|
|Warranty Offered||Featuring the Industry's Longest Standard Warranty - 5 Year Parts and Labor on Sealed Refrigeration System - 5 Year Limited Functional Parts - 2 Year Labor on Functional Parts|
|Energy Star Rated||No|
|Nominal Capacity (BTU)||9,000|