Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of one inch water pipe or eight square feet of flat surface area with two coats.Ideally, the product should be at room temperature (70-75?F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80?F); however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120?F. Do not use on plastics or painted surfaces.
|Weight||1.5 Pound (lb.)|
|Height||9.5 Inches (in)|
|Width||2.75 Inches (in)|
|Length||2.75 Inches (in)|
|Package Quantity||6 x 18 oz. cs.|