- Indoor Wall Mounted Unit (6K): MSZ-GE06NA-8 (x4)
- Outdoor Condenser: MXZ-4B36NA-1
- Wireless Remote Control (x4)
- Required, but not included: 1/4" x 3/8" (x4) line sets
This MR SLIM INVERTER-driven four-zone heat pump system, with ductless wall-mounted indoor units, helps reduce energy costs by controlling each zone separately. It's ideal for conditioning residential spaces such as bedrooms, living rooms, dining rooms, garages, basements, kitchens, bonus rooms, home offices, out-buildings, and more. This system has a rated capacity of 35,400 BTU cooling/36,00 BTU heating, while operating at 18 SEER/9.3 HSPF.
This system is compatible with the optional MHK1 wireless, RFI-RedLINK™ enabled, full-function wall mount controller, allowing homeowners to control their unit from a remote PC, smartphone or tablet (sold separately). If you prefer a standard, fully wired and functioning wall mount control, this system also works with the PAR-31MAA (sold separately and requires control adaptor MAC-333IF).
The M-Series INVERTER-driven compressor and linear expansion valve (LEV) works with the system’s sophisticated electronic controls to detect temperature changes in a room or zone, automatically changing speeds to adjust for precise capacity and temperature control.
These indoor units use a sophisticated multiple filtration system to ensure clean, healthy air throughout the rooms/zones they condition. The Hybrid Catechin washable pre-filter captures dust and eliminates odors, while the Blue Enzyme washable filter uses an enzyme catalyst to capture and eliminate allergens, germs, bacteria, and viruses.
Mr. Slim Indoor Units operate at very low sounds levels (19-35 decibels). According to a study performed by the National Institute for Occupational Safety and Health, most Mr. Slim Indoor Units are quieter than a human whisper (30 decibels) at low speed.
Mitsubishi was clearly taking the environment into consideration when designing the M-Series line by using R410A refrigerant with zero Ozone Depletion Potential (ODP), 83% recyclable components, and washable filters made from natural materials on all models.
Additional Features & Benefits
- Auto fan speed feature plus five speed settings available (Quiet, Low, Medium, High, Super High)
- Wide discharge vane and Swing Mode feature provides up to 150° horizontal air flow coverage
- “Smart Set” feature provides single button temperature recall
- Wireless handheld remote controllers included
- Indoor unit front panel access makes filter cleaning an easy task
- Compact, side discharge outdoor unit
- Zone control
- Quiet outdoor operation ranging from 49-58 dB(A)
- Self-check function with integrated diagnostics
- Hot-start technology ensures warm air from startup
- Auto restart feature works after a power outage
- Outdoor condenser powers the indoor units
How many BTUs do I need for my ductless split?
Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty.
(BTU ratings are estimates only, based on 10ft ceilings, with great insulation and windows. Some factors may alter this calculation: lack of insulation, heavy sun, excessively hot regions, & tall ceilings)
9,000 BTU 350 sqft
12,000 BTU 500 sqft
18,000 BTU 750 sqft
24,000 BTU 1,000 sqft
30,000 BTU 1,250 sqft
36,000 BTU 1,500 sqft
Make sure you install a unit that is going to properly cool your square footage. An over-sized air conditioner is actually less effective — and wastes energy at the same time. Air conditioners remove both heat and humidity from the air. If the unit is too large, it will cool the room quickly, but only remove some of the humidity. This leaves the room with a damp, clammy feeling. A properly sized unit will remove humidity effectively as it cools.
Which Line Set Kit Do You Need?
This unit uses four 1/4" x 3/8" line sets. These are sold separately, and you can choose from our 15 ft, 25 ft, and 50 ft lengths. The length needed depends on the needs of your project and how you will set up the system (distance from outdoor condenser to indoor air handler).
|Model Family||M-Series Multi Zone|
|Equipment Type||Heat Pump|
|EER (Energy Efficiency Ratio)||9.4|
|HSPF (Heating Seasonal Performance Factor)||9.3|
|Rated Cooling Capacity (BTU)||35,400|
|Rated Heating Capacity (BTU)||36,000|
|Nominal Capacity (BTU)||36,000|
|Minimum Circuit Amps||23|
|Maximum Fuse Size||25|
|Number of Zones/Rooms||4 Zones|
|COP (Coefficient of Performance)||3.5|
|Mounting Type||Wall Mount|
|Warranty Offered||7 Year Compressor - 5 Year Parts|
|Energy Star Rated||No|
|Maximum Heating Capacity||43,000|
|Minimum Cooling Capacity||12,600|
|Liquid/Gas Line Set Size||A: 1/4" X 3/8" B: 1/4" X 3/8" C: 1/4" X 3/8" D: 1/4" X 3/8"|
|Maximum Cooling Capacity||36,400|
|4-Way Remote Air Flow Control||Yes|
|Minimum Heating Capacity||11,400|
|Sound Pressure Rating||ID - Cool - 19/22/30/37/43 dB(A) Heat - 19/22/30/37/43 dB(A) OD - Cool/Heat - 54/57 dB(A)|
|Filter Type||Multiple, Reusable|
- Specification Sheet
- Parts List
- Service Manual
- Installation Instructions 1
- Wiring Diagrams
- Submittal Sheet